Licensed contractor · UAE
Concrete cutting in Abu Dhabi, Dubai & Al Ain
Diamond core drilling, wall and floor sawing, wire sawing and controlled demolition. Every cut is scanned before it is made, so nothing structural gets severed by accident.
Services
Eleven methods, one crew
Core Cutting
Precise round penetrations through slabs, walls and beams with diamond core rigs.
Ø25–600 mm · Method 01 →
Concrete Slab Core Cutting
Vertical cores through suspended and on-grade slabs for services and anchors.
Depth to 1200 mm · Method 02 →
Concrete Wall Core Cutting
Horizontal cores through RC walls for pipework, cabling and HVAC routes.
Ø25–600 mm · Method 03 →
Wall Saw Cutting
Track-mounted blade sawing for door, window and duct openings in walls.
To 800 mm · Method 04 →
Floor Saw Cutting
Walk-behind sawing for trenches, joints and slab panels in floors.
To 500 mm · Method 05 →
Wire Saw Cutting
Diamond wire for mass concrete and sections beyond blade reach.
No depth limit · Method 06 →
Concrete Beam Cutting
Controlled cutting and removal of propped RC beams and transfer elements.
Engineered sequence · Method 07 →
Concrete Scanning
GPR surveys that map rebar, post-tension and services before any cut.
To 600 mm · Method 08 →
Concrete Demolition
Controlled demolition of RC elements without percussive damage.
Dust & slurry controlled · Method 09 →
Concrete Slab Demolition
Cut, lift and crane-out removal of floor slabs in occupied buildings.
Sectional removal · Method 10 →
Concrete Staircase Demolition
Staircase flights cut into sections and removed without impact.
Sectional removal · Method 11 →
Scan first
What is inside the slab decides where the cut goes
Before any blade or bit touches concrete, we run a GPR survey across the cut zone. Rebar, post-tension strands and buried services are marked directly on the surface, and depths are noted on a scan plan you keep.
If the cut has to move to avoid something structural, you find out during the survey — not after the damage is done.
Method selector
Which method your job needs
| Requirement | Core | Slab core | Wall core | Wall saw | Floor saw | Wire saw | Beam | Scanning | Demolition | Slab demo | Stair demo |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Round penetration through a floor | ✓ | ○ | — | — | — | — | — | — | — | — | — |
| Round penetration through a wall | ✓ | — | ○ | — | — | — | — | — | — | — | — |
| Rectangular opening in a wall | — | — | — | ✓ | — | ○ | — | — | — | — | — |
| Trench or joint in a floor slab | — | — | — | — | ✓ | — | — | — | — | — | — |
| Section thicker than 800 mm | — | — | — | — | — | ✓ | — | — | — | — | — |
| Remove a floor slab | — | — | — | — | ○ | ○ | — | — | — | ✓ | — |
| Remove a staircase | — | — | — | — | — | ○ | — | — | — | — | ✓ |
| Alter a structural beam | — | — | — | — | — | ○ | ✓ | — | — | — | — |
| Locate rebar or services first | — | — | — | — | — | — | — | ✓ | — | — | — |
✓ Suitable ○ Possible alternative — Not the right tool
Occupied buildings
Most of our work happens after you have gone home
Hotels, malls and offices cannot close for cutting works. Our crews sheet off, cut, vacuum the slurry and hand the area back before the doors open — night shift after night shift, without a complaint logged.
Process
How a job runs
STEP 01 — Send drawings
Email or WhatsApp your drawings or dimensioned photos. We reply within four working hours.
STEP 02 — Survey and scan
A free site visit with a GPR scan of the cut zone, marked up on the surface and on plan.
STEP 03 — Fixed quote
Method, crew, duration and a fixed price. No open-ended hourly billing.
STEP 04 — Cut and clear
We cut, contain the slurry, remove the waste and hand the area back clean.
Sectors
Where we work
Towers & high rise
Core and saw works on live high-rise sites, coordinated with main contractors.
Hotels & malls
Night-shift cutting in occupied hospitality and retail, handed back before opening.
Hospitals & labs
Low-vibration, dust-controlled methods around sensitive equipment and wards.
Industrial & warehousing
Mussafah, Al Quoz and ICAD plants — trenches, pits and machine bases.
Villas & residential
Al Ain and Khalifa City villas — openings, extensions and staircase removals.
Infrastructure
Roads, bridges and utilities cutting for contractors across the Emirates.
Plant
The fleet doing the work
Recent work
Cuts we have made
Abu Dhabi — Lift shaft openings
14 openings wall-sawn through 350 mm RC core walls, completed over three night shifts.
Dubai — Chilled water penetrations
240 cores, Ø100–350 mm, drilled through nine occupied floors without a leak or strike.
Al Ain — Slab removal for atrium
90 m² of slab wire-sawn, sectioned and craned out in six days.
The difference
What actually differs
Scanning included
Every structural cut is GPR-scanned first, at no separate line item.
Certified operators
Trained, certified crews on every rig and saw — no loose labour.
Slurry controlled
Vacuum extraction and bunding on every wet cut. Floors stay clean.
Waste leaves with us
Cut sections and arisings removed within the quoted price.
Coverage
Abu Dhabi, Dubai and Al Ain first
Crews based in Abu Dhabi, mobilising across all seven emirates.
Compliance
Paperwork that clears site
Trade licence
Licensed specialist contractor, registered in the UAE.
Insurance
Public liability and workmen's compensation cover in place.
HSE documents
Method statements and risk assessments issued per job.
Permits to work
Hot work, night work and facility permits handled with your FM team.
FAQ
Common questions
Price depends on the method, concrete thickness, reinforcement, access and shift timing. Mobilisation is charged once per visit, and every job is quoted as a fixed price before we start.
Every structural cut is GPR-scanned first, and for structural work the scan is included in the quoted price — not billed as a separate line item.
Yes. Most of our hotel, mall and office work runs at night under permits, with the area isolated, slurry vacuum-extracted and handed back before opening. A night-shift uplift applies.
Wall saws reach about 800 mm and floor saws about 500 mm. Beyond that, wire sawing has no practical depth limit, and core drilling reaches 1200 mm deep at Ø25–600 mm.
A drawing, or even a dimensioned photo of the area, is enough for a fixed quote within four working hours.
Get a fixed price
Send the drawings, get a fixed price
Reply within four working hours. Your details are used to quote the job only — no marketing lists.
📞 +971 55 464 7375
WhatsApp us · info@concretecuttingae.com
Open 24 hours · Abu Dhabi · Dubai · Al Ain