Eleven methods
Concrete cutting services in the UAE
Every method we operate, what each one is for, and its working limits. Not sure which applies? Use the selector below or send the drawing and we will specify it.
Core Cutting
Clean round penetrations for MEP, anchoring and testing.
Ø25–600 mm→
Concrete Slab Core Cutting
Downward coring through suspended and ground floor slabs.
Ø25–600 mm→
Concrete Wall Core Cutting
Horizontal through-wall cores for AC, extract and services.
Ø25–600 mm→
Wall Saw Cutting
Track-mounted sawing for doors, windows and lift shafts.
To 800 mm→
Floor Saw Cutting
Slab sawing for trenches, joints and floor openings.
To 500 mm→
Wire Saw Cutting
Diamond wire for mass concrete beyond blade reach.
No depth limit→
Concrete Beam Cutting
Structural RC cuts with propping and load transfer.
Engineer signed→
Concrete Scanning
GPR survey and marked-up plan before any blade goes in.
To 600 mm→
Concrete Demolition
Controlled demolition, slabs through to staircases.
Waste removed→
Concrete Slab Demolition
Suspended and ground slabs cut into sections and lifted out.
Propped & craned→
Concrete Staircase Demolition
Flights and landings cut free and removed in sections.
Access sized→Method selector
Which method your job needs
Find your requirement on the left. Suitable methods are marked across.
| Requirement | Core | Slab core | Wall core | Wall saw | Floor saw | Wire saw | Beam | Scan | Demo | Slab demo | Stair demo |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Round penetration through a floor | |||||||||||
| Round penetration through a wall | |||||||||||
| Rectangular opening in a wall | |||||||||||
| Trench or joint in a floor slab | |||||||||||
| Section thicker than 800 mm | |||||||||||
| Remove a floor slab | |||||||||||
| Remove a staircase | |||||||||||
| Alter a structural beam | |||||||||||
| Locate rebar or services first |
SuitableNot the right tool Unsure? Send the drawing and we will specify it.
Coverage