Home / Projects
Recent work
Cuts we have made across the UAE
Method, depth and duration for each job, so you can judge whether we have done work like yours before.
Lift shaft openings
Fourteen openings through a 350 mm RC core wall, cut over three night shifts with the building live.
Method: Wall sawingDepth: 350 mm
Chilled water penetrations
240 cores from Ø100 to Ø350 mm across nine floors, scanned and set out ahead of each pour.
Method: Slab coringCores: 240
Slab removal for atrium
Wire sawing and lift-out of a 90 m² section, propped, craned and cleared in six days.
Method: Slab demolitionArea: 90 m²
Service trench cutting
180 linear metres of trench cut through a 250 mm ground slab for drainage and power routes.
Method: Floor sawingLength: 180 m
Transfer beam opening
Duct penetration formed through a 900 mm downstand beam under engineer approved propping.
Method: Beam cuttingSection: 900 mm
Staircase demolition
Concrete flight and landings cut free and removed through a standard doorway in sections.
Method: Stair demolitionElements: 3 flights
[Images apni site photography se replace kar lena — source note]
Sectors
Sectors we work in
Towers & high rise
Riser penetrations and core wall openings on live floor plates.
Hotels & malls
Night shift cutting with full containment in occupied buildings.
Industrial
Machine bases, plinths and trenches in Mussafah, ICAD and Al Quoz.
Residential
Villa openings and staircase removal across Al Ain and Khalifa City.
Have a job like one of these?
Send the drawings and we will tell you the method, the duration and the price.